2Wire 270X Firmware Update for Windows

2Wire 270X Firmware Update for Windows and Macintosh

Please DO NOT close this window.

To perform a successful modem upgrade, it is critical that these instructions be followed closely. Please wait until the upgrade is completed and you have reconnected to the internet to close the window.

Please note:

• You must be connected DIRECTLY to the modem with an Ethernet cable!
• Do NOT use wireless, USB, or be connected through another piece of equipment such as a hub, switch or router.
• Turn off any firewall programs before performing this procedure. Be sure to turn these back on when the recovery process is complete.

Download the upgrade file:

Step 1

Start the download by ( cut and paste into browser address ) to download file below.


ENTER THIS LINK IN YOUR BROWSER ADDRESS BAR TO DOWNLOAD THE FILE 
( CUT AND PASTE ) 

http://www.qwest.com/internethelp/modems/270X/Firmware/2700-2701--QT04-6.1.5.48.2sp

Step 2 Click Save



Step 3
Save this file to your Desktop.



Upgrading the Firmware:

Step 1

Go to the 2Wire Software Upgrade page http://192.168.0.1/upgrade.

Step 2

Click Continue.

Step 3
Select Browse.




Step 4
Select Open.



Step 5
Select Upgrade Now.



Step 6
This screen shows the status of the upgrade, no action is required.



Step 7
Type 192.168.0.1 in the address bar and press Enter. You will see the following page.
You will now need to reprogram the modem with custom settings.
(e.g. PPP credentials, static IP entries, wireless settings, etc)




 



 The MDC is not required to flash the modem.
The flash site is:
gateway.2wire.net/tech/upgrade.html

As for getting the firmware, read here:
http://www.the-scream.co.uk/forums/showthread.php?p=222693#post222693